Directions for using the Stamp Alignment Tool.

1. Stamp the first fence onto your card. (Fig. 1)

2. Line up the "L" Square with the upper left corner of the acrylic plate. Stamp the fence image onto the plate with the edges of the wood mount touching the upper and left portions of the "L" square's corner. (Fig. 2)

3. Set aside the "L" square. Position the acrylic plate so the image is exactly where you want it to be placed. Now, place the "L" square back into position. (Fig. 3)

4. Carefully hold the "L" square in place and remove the acrylic plate. Stamp the second fence image in place on the card, lining up the wood mount with the corner of the "L" square as before. (Fig. 4) Keep the "L" square in place until you are sure that your image is well stamped. If it is not, stamp it again.

This tool can be very effectively used to center word or phrase stamps. Stamp an image carefully onto all 4 corners of the acrylic plate, (Fig. 5) and then use the technique above to place the images exactly where you want hem.

The acrylic plate is easy to clean. Just wipe it with a damp cloth or hold under running water. Alcohol is necessary to clean off Memories ink which has dried on the plate.

T E C H N I Q U E   E X A M P L E S

Click on an example for a larger view,
please use the BACK button on your browser to return

Stamp Alignment Tool used to stamp multiple fences to line up.